2023 Provide Updated Network Appliance NS0-516 Dumps as Practice Test and PDF
NS0-516 Dumps are Available for Instant Access
NetApp NS0-516 Exam Certification Details:
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Passing Score | 75% |
| Duration | 90 minutes |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
NEW QUESTION 15
Which file contains the configuration for a multipath driver for FC on Linux systems?
- A. /etc/kernel/mp.conf
- B. /etc/dm-multipath.conf
- C. /etc/multipath.conf
- D. /opt/multipath/multipath.cnf
Answer: C
NEW QUESTION 16
The ability of many E-Series controllers to hold an additional firmware image in reserve _________. (Choose the best answer.)
- A. allows controller firmware to be downloaded immediately and activated at a later time
- B. is used to store a backup boot image
- C. is used for Support use only
- D. allows two firmware images to be used at the same time
Answer: D
NEW QUESTION 17
Identify this image.
- A. DE6600 ESM
- B. E2700 controller
- C. E5600 controller
- D. DE5612 ESM
Answer: C
NEW QUESTION 18
What is the minimum number of drives needed to create a Dynamic Disk Pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 19
How many paths provide optimal redundancy from a host through a switched topology to a storage system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 20
A customer wants to manage an E-Series system over a secure connection between the system and a server. During implementation, you are asked to fulfill this installation requirement.
In this scenario, which three actions are required to complete this task? (Choose three.)
- A. Complete the certificate signing request on the system
- B. Disable all the system's local user roles except admin
- C. Import certificate authority signed certificates into the system
- D. Disable the legacy management interface on the system
- E. Import the system's self-signed certificates into the system
Answer: A,D,E
NEW QUESTION 21
Exhibit:
Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 22
Click the Exhibit button.
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log?
(Choose three.)
- A. Move the connection to another controller port
- B. Reinitialize the FC switch
- C. Swap out the HBA on the FC switch
- D. Swap out the FC cable
- E. Swap out the SFP in the controller port
Answer: C,D,E
NEW QUESTION 23
What is the 'base' host connectivity provided by the E2600 controller? (Choose the best answer.)
- A. SAS
- B. FC
- C. None
- D. IB
- E. iSCSI
Answer: A
NEW QUESTION 24
Click the Exhibit button.
You ordered a NetApp E2812 Duplex 16GB 10 GbE Base-T system.
Referring to the exhibit, what is the maximum number of 10GbE Base-T ports available to be used?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 25
When working on a customer's E-Series system to configure LDAP, you realize that you need to complete a Certificate Signing Request to receive a certificate.
In this scenario, when entering the information for the CSR, what information do you need from the controllers themselves? (Choose three.)
- A. the controller's alternate names
- B. the controller's geographical location
- C. the controller's common name
- D. the controller's serial number
- E. the controller's alternate IP addresses
Answer: A,C,E
NEW QUESTION 26
Click the Exhibit button.
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 27
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)
- A. the corresponding application's RTO
- B. half the corresponding application's RPO
- C. the corresponding application's RPO
- D. the amount of time required to copy the size of the mirror repository to the remote site
- E. half the corresponding application's RTO
Answer: D
NEW QUESTION 28
Click the Exhibit button.
A customer's host is running a Red Hat Enterprise Linux 7.6 server with dm-mp configured for ALUA and is connected to a single volume on the EF280 system that is shown in the exhibit.
In this scenario, how many active/optimized paths are available to the volume?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 29
To enable one-way authentication in a new iSCSI Linux implementation, which three modifications should you make in the /etc/iscsi/iscsid.conf file on the Linux host? (Choose three.)
- A. CHAP
- B. sendtargets discovery
- C. iSCSI
- D. the initiator username and password
- E. the target username and password
Answer: A,B,E
NEW QUESTION 30
Which native GUI switch tool is used to manage Brocade switches and directors?
- A. Device Manager
- B. Enterprise Fabric Services
- C. Web Tools
- D. SAN Manager
Answer: C
NEW QUESTION 31
If an FDE disk fails, which characteristic is required of the replacement disk?
- A. Must be loaded with DACstore
- B. Must be T10-P1 capable
- C. Must be FDE capable
- D. Must be of a greater capacity
Answer: C
NEW QUESTION 32
A customer needs to add an EF280 with FC into its existing Brocade fabric but the FC ports in the SANtricity System Manager are showing the FC ports as down and the LED on the FC HIC is amber.
Which three tasks does the installer need to complete to solve this problem? (Choose three.)
- A. Verify that the cables are plugged into the switch
- B. Verify that the server HBA has the boot BIOS enabled
- C. Verify that the switch zone has the WWPNs for the EF280 and Server HBAs
- D. Verify that the ports are enabled on the switch
- E. Verify that the EF280s management port is up
Answer: A,C,D
NEW QUESTION 33
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. twisted cables, wrong plugs, or cable material
- B. wrong switch configuration
- C. faulty SFPs, cables, or patch panels
- D. protocol errors, encoding errors, or conversion errors
Answer: D
NEW QUESTION 34
When you replace a component, why should you wait for the action to register in the storage manager?
- A. To ensure that the controller configuration database has a record of the change
- B. To ensure that the storage manager completes the component repair sleep cycle
- C. To ensure that the host OS completes SOD processing
- D. To ensure that the administrator has time to complete ESD procedures
Answer: A
NEW QUESTION 35
The Netapp E-Series system with a 32 Gb FC Host Interface Card (HIC) requires which type of fiber cable to connect to switches or to connect directly to hosts extending up to 100 meters?
- A. OM3
- B. OM1
- C. OM2
- D. OM4
Answer: A
NEW QUESTION 36
Where does the explicit multipath driver reside?
- A. in the controller's memory
- B. host on the storage manager client
- C. on the storage manager host
- D. on the I/O host
Answer: D
NEW QUESTION 37
......
Updated NS0-516 Dumps Questions For Network Appliance Exam: https://vcetorrent.examtorrent.com/NS0-516-prep4sure-dumps.html
