Pass Your 1Y0-241 Exam Easily - Real 1Y0-241 Practice Dump Updated Feb 12, 2022
2022 Realistic Verified Free Citrix 1Y0-241 Exam Questions
NEW QUESTION 37
Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?
- A. The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
- B. The junior administrator made the changes and did NOT force a failover to save the configuration.
- C. The Citrix ADC appliances have different firmware versions.
- D. Both Citrix ADCs in the HA pair restarted overnight.
Answer: D
NEW QUESTION 38
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
- A. Ensure that users have the server certificate installed.
- B. Ensure that users have the certificate's private key.
- C. Ensure that users have the certificate's public key.
- D. Ensure that the server certificate is linked to its respective intermediate and root certificates.
Answer: C
NEW QUESTION 39
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Configure a CS vServer of target type GSLB.
- B. Bind the domain to the CS vServer instead of the GSLB vServer.
- C. Configure CS policies that designate a load-balancing vServer as the target vServer.
- D. Bind the GSLB domain to the GSLB vServer.
Answer: A,C
NEW QUESTION 40
What
is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. If
the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain
.com/mysite/. - B. If
the vServer-CS-1 encounters a high connection rate, then users will be redirected to
http://www.newdomain.com/mysite/. - C. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- D. All
the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
Answer: A
NEW QUESTION 41
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
- A. TCP logging is NOT enabled.
- B. User-defined audit log is NOT configured.
- C. Log facility is NOT configured.
- D. Log level is NOT enabled.
Answer: D
NEW QUESTION 42
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Wait time
- B. Persistence time-Out
- C. Persistence threshold
- D. Request threshold
Answer: B
NEW QUESTION 43
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP on port 80
- B. HTTP_ECV on port 99
- C. HTTP-ECV on port 80
- D. HTTP on port 99
Answer: B
NEW QUESTION 44
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
Answer: A
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX122921
NEW QUESTION 45
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Canonical Name (CNAME)
- B. Name Server (NS) record
- C. Address (A) record
- D. Pointer Record (PTR)
Answer: B
NEW QUESTION 46
Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access.
Which license should the administrator recommend purchasing?
- A. Citrix ADC Burst Pack
- B. Citrix Gateway Express
- C. Citrix ADC Upgrade
- D. Citrix Gateway Universal
Answer: D
NEW QUESTION 47
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A. a physical interface
- B. a CPU
- C. the kernel
- D. memory
Answer: B,D
NEW QUESTION 48
Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.
Why is the administrator unable to see all 100 virtual servers?
- A. The Citrix ADC and Citrix ADM firmware versions are NOT the same.
- B. The nsroot passwords are NOT the same across all the Citrix ADCs.
- C. Citrix ADM is using a free license.
- D. Additional Citrix ADM systems need to be deployed to see all virtual servers.
Answer: D
NEW QUESTION 49
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Plug another 10G Citrix ADC port into the router.
- B. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
- C. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- D. Purchase another Citrix ADC MPX appliance.
Answer: B
NEW QUESTION 50
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode.
The current load-balancing setup on the Citrix ADC is:
* One load-balancing vServer with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers.
What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Disable the load-balancing vServer.
- B. Disable the backend service entity targeted for change.
- C. Unbind the correct server entity from the load-balancing vServer.
- D. Disable the backend server entity targeted for change.
Answer: A
NEW QUESTION 51
Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active Directory (AD) domain controller?
- A. A ping monitor with the IP address of the AD domain controller in the special parameters
- B. A MYSQL-ECV monitor with the Base DN, Bind DN, Filter, Attribute, and Password parameters configured in the basic parameters
- C. An LDAP monitor with the LDAP Script Name, Configured Base DN, Bind DN, Filter, Attribute and Password parameters in the basic parameters.
- D. A TCP monitor with the LDAP Base DN configured in the basic parameters.
Answer: C
NEW QUESTION 52
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. SSL protocol for the vServer
- B. SSL protocol for the services
- C. HTTP protocol for the services
- D. HTTP protocol for the vServer
- E. SSL bridge protocol for the vServer
- F. SSL bridge protocol for the services
Answer: A,B
NEW QUESTION 53
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?
- A. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- B. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)
- C. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- D. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
Answer: C
NEW QUESTION 54
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith "DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host1.example.net" will be redirected to "host.example.com".
- C. Request originated from "host.example.net" will be redirected to "host1.example.com".
- D. Request originated from "host1.example.net" will be redirected to "host.example.com".
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 55
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC MPX
- C. Citrix ADC SDX
- D. Citrix ADC VPX
Answer: A
NEW QUESTION 56
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default loadbalancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least bandwidth
- B. Least response time
- C. Least packets
- D. Least connection
Answer: D
NEW QUESTION 57
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns simpleacl
- B. add ns acl6
- C. add ns acl
- D. add ns simpleacl6
Answer: C
NEW QUESTION 58
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image optimization
- B. Domain sharding
- C. Image lazy loading
- D. Image shrink-to attributes
Answer: A
Explanation:
Explanation
NEW QUESTION 59
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*" - B. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - C. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
"https://server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - D. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
"https://server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
Answer: D
NEW QUESTION 60
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
"DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host1.example.net" will be redirected to "host.example.com".
- C. Request originated from "host.example.net" will be redirected to "host1.example.com".
- D. Request originated from "host1.example.net" will be redirected to "host.example.com".
Answer: D
NEW QUESTION 61
......
1Y0-241 Real Exam Questions and Answers FREE: https://vcetorrent.examtorrent.com/1Y0-241-prep4sure-dumps.html
