[Dec-2025] Fortinet FCP_FGT_AD-7.6 Dumps - Secret To Pass in First Attempt [Q15-Q38]

[Dec-2025] Fortinet FCP_FGT_AD-7.6 Dumps - Secret To Pass in First Attempt

Fortinet FCP_FGT_AD-7.6 Exam Dumps [2025] Practice Valid Exam Dumps Question

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
Topic 2	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.
Topic 3	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 4	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.
Topic 5	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.

 

NEW QUESTION # 15
An administrator notices that some users are unable to establish SSL VPN connections, while others can connect without any issues.
What should the administrator check first?

• A. Ensure that the affected users are using the correct port number.
• B. Ensure that the HTTPS service is enabled on SSL VPN tunnel interface
• C. Ensure that forced tunneling is enabled to reroute all traffic through the SSL VPN
• D. Ensure that user traffic is hitting the firewall policy.

Answer: D

Explanation:
If user traffic is not matching the appropriate firewall policy that permits SSL VPN, users will be unable to establish connections, making this the first aspect to verify.

NEW QUESTION # 16
Which two statements are true about an HA cluster? (Choose two.)

• A. When sniffing the heartbeat interface, the administrator must see the IP address 169.254.0.2.
• B. Link failover triggers a failover if the administrator sets the interface down on the primary device.
• C. An HA cluster cannot have both in-band and out-of-band management interfaces at the same time.
• D. HA incremental synchronization includes FIB entries and IPsec SAs.

Answer: B,D

Explanation:
Setting an interface down on the primary device triggers a failover due to link failover detection.
HA incremental synchronization includes forwarding information base (FIB) entries and IPsec security associations (SAs) to maintain session continuity.

NEW QUESTION # 17
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

• A. The Underlay zone is the zone by default.
• B. The virtual-wan-link and overlay zones can be deleted.
• C. The Underlay zone contains no member.
• D. port2 and port3 are not assigned to a zone.

Answer: A

Explanation:
The Underlay zone is the default SD-WAN zone, typically representing the physical interfaces in the SD-WAN configuration before overlay or virtual links are added.

NEW QUESTION # 18
Which two statements describe characteristics of automation stitches? (Choose two.)

• A. Actions involve only devices included in the Security Fabric.
• B. An automation stitch can have multiple triggers.
• C. Multiple actions can run in parallel.
• D. Triggers can involve external connectors.

Answer: C,D

Explanation:
Automation stitches can execute multiple actions concurrently (in parallel).
Triggers for automation stitches can come from external connectors beyond just Fortinet devices.

NEW QUESTION # 19
Which three statements explain a flow-based antivirus profile? (Choose three.)

• A. FortiGate buffers the whole file but transmits to the client at the same time.
• B. Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection.
• C. If a virus is detected, the last packet is delivered to the client.
• D. Flow-based inspection optimizes performance compared to proxy-based inspection.
• E. The IPS engine handles the process as a standalone.

Answer: A,B,D

Explanation:
Flow-based antivirus buffers the entire file while simultaneously transmitting data to the client to minimize latency.
Flow-based inspection combines multiple scanning techniques from proxy-based modes for efficient detection.
Flow-based inspection provides better performance by processing traffic on the fly without full proxy overhead.

NEW QUESTION # 20
A remote user reports slow SSL VPN performance and frequent disconnections. The user is located in an area with poor internet connectivity.
What setting should the administrator adjust to improve the user's experience?

• A. Configure the DTLS timeout to accommodate high-latency connections.
• B. Enable split tunneling to reduce VPN traffic.
• C. Increase the session timeout for inactive sessions.
• D. Change the SSL VPN port to a non-standard port.

Answer: A

Explanation:
Adjusting the DTLS timeout helps maintain SSL VPN stability and performance in environments with poor or high-latency internet connectivity by allowing more time for packet retransmissions before dropping the connection.

NEW QUESTION # 21
Refer to the exhibits.

An administrator has observed the performance status outputs on an HA cluster for 55 seconds.
Which FortiGate is the primary?

• A. HQ-NGFW-2 with the parameter priority setting
• B. HQ-NGFW-1 with the parameter override setting
• C. HQ-NGFW-2 with the parameter memory-failover-threshold setting
• D. HQ-NGFW-1 with the parameter memory-failover-flip-timeout setting

Answer: B

Explanation:
The HA configuration shows that override is disabled (set override disable), but despite this, HQ-NGFW-1 has the higher priority (200) and is acting as the primary, as indicated by its higher resource usage and uptime. Override allows the device with higher priority to take over as primary, so HQ-NGFW-1 is the primary device.

NEW QUESTION # 22
Refer to the exhibit.

The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity.
What must the administrator configure to answer this specific request from the NOC team?

• A. Move NOC_Access to the top of the list to ensure all profile settings take effect.
• B. Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.
• C. Increase the admintimeout value under config system accprofile NOC_Access.
• D. Ensure that all NOC_Access users are assigned the super_admin role to guarantee access

Answer: C

Explanation:
The admintimeout setting in the admin access profile controls the inactivity timeout for GUI sessions. Increasing this value will extend the session duration before automatic disconnection.

NEW QUESTION # 23
When configuring a FortiGate in a multi-WAN setup, why would an administrator enable session preservation on an interface?

• A. To make sure all sessions without source NAT enabled always use the primary WAN link
• B. To ensure that existing SSL VPN connections remain on the same interface even if route changes occur
• C. To allow the FortiGate to dynamically change interfaces for all active sessions when a WAN link fails
• D. To improve security by forcing users to authenticate again when the WAN link changes

Answer: B

Explanation:
Session preservation keeps active sessions, such as SSL VPNs, tied to the original interface to prevent disruption when WAN routes change.

NEW QUESTION # 24
You have created a web filter profile named restrict_media-profile with a daily category usage quota.
When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.
What could be the reason?

• A. The naming convention used in the web filter profile is restricting it in the firewall policy.
• B. The inspection mode in the firewall policy is not matching with web filter profile feature set.
• C. The web filter profile is already referenced in another firewall policy.
• D. The firewall policy is in no-inspection mode instead of deep-inspection.

Answer: B

Explanation:
Web filter profiles with category usage quotas require the firewall policy to be in proxy-based (deep) inspection mode; if the inspection mode does not match this requirement, the profile will not appear in the drop-down list.

NEW QUESTION # 25
Which two statements are correct when FortiGate enters conserve mode? (Choose two.)

• A. FortiGate continues to run critical security actions, such as quarantine.
• B. FortiGate refuses to accept configuration changes.
• C. FortiGate halts complete system operation and requires a reboot to regain available resources.
• D. FortiGate continues to transmit packets without IPS inspection when the fail-open global setting in IPS is enabled.

Answer: B,D

Explanation:
In conserve mode, FortiGate restricts configuration changes to preserve system stability.
When IPS fail-open is enabled, FortiGate continues forwarding traffic without IPS inspection during resource constraints (conserve mode).

NEW QUESTION # 26
An administrator suspects that the Collector Agent is not forwarding login events to FortiGate.
What is the most effective troubleshooting step?

• A. Check if TCP port 8000 is open between the collector agent and FortiGate.
• B. Verify if FortiGate is set to use LDAP authentication instead of FSSO.
• C. Verify if DC agent is enabled on the FortiGate.
• D. Restart the domain controller to refresh authentication services.

Answer: A

Explanation:
The Collector Agent communicates with FortiGate over TCP port 8000. Ensuring this port is open and reachable is essential for forwarding login events.

NEW QUESTION # 27
FortiGate is operating in NAT mode and has two physical interfaces connected to the LAN and DMZ networks respectively.
Which two statements about the requirements of connected physical interfaces on FortiGate are true? (Choose two.)

• A. Both interfaces must have the interface role assigned.
• B. Both interfaces must have directly connected routes on the routing table.
• C. Both interfaces must have IP addresses assigned.
• D. Both interfaces must have DHCP enabled and interfaces set to LAN and DMZ roles assigned.

Answer: B,C

Explanation:
Interfaces must have directly connected routes in the routing table to forward traffic correctly.
Interfaces must have IP addresses assigned to communicate within their respective networks.

NEW QUESTION # 28
An administrator wants to analyze and manage digital certificates to prevent browser warnings when users connect to the SSL VPN portal.
Which two statements describe how to correctly do this? (Choose two.)

• A. The administrator can import the FortiGate self-signed certificate into each user's browser as a trusted certificate.
• B. The administrator can use a publicly trusted certificate from a known certificate authority (CA) to stop browser warnings.
• C. The administrator must disable HTTPS administrative access entirely to avoid certificate warnings.
• D. The administrator can rely on the default FortiGate self-signed certificate to prevent all security warnings in the browser.

Answer: A,B

Explanation:
Using a publicly trusted certificate from a known CA prevents browser warnings without additional user action.
Importing the FortiGate self-signed certificate into users' browsers as trusted eliminates warnings caused by untrusted certificates.

NEW QUESTION # 29
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver.
Which additional configuration can the administrator add to a deny firewall policy, beyond the default behavior, to block Remote-User2 from accessing the Webserver?

• A. Disable match-vip in the Allow_access policy
• B. Set the Destination address as Deny_IP in the Allow_access policy.
• C. Configure a One-to-One IP Pool object in a new policy.
• D. Set the Destination address as Webserver in the Deny policy.

Answer: D

Explanation:
To block Remote-User2's access to the Webserver, the deny policy must explicitly specify the Webserver as the destination address; otherwise, it denies traffic to all destinations, which is not the desired behavior.

NEW QUESTION # 30
Which three statements about SD-WAN performance SLAs are true? (Choose three.)

• A. They rely on session loss and jitter.
• B. They are applied in a SD-WAN rule lowest cost strategy.
• C. They monitor the state of the FortiGate device.
• D. All the SLAtargets can be configured.
• E. They can be measured actively or passively.

Answer: A,D,E

Explanation:
SD-WAN SLAs monitor metrics like packet loss and jitter to evaluate link performance.
SLA measurements can be performed using active probing or passive monitoring.
Administrators can configure all SLA target parameters to define performance criteria.

NEW QUESTION # 31
Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route.
Why is the administrator not able to select the new address in the Destination field of the new static route?

• A. In the new static route, the administrator must first set the interface to port2.
• B. In the new firewall address, the FQDN address must first beresolved.
• C. In the new static route, the administrator must select Named Address.
• D. In the new firewall address, Routing configuration must be enabled.

Answer: D

Explanation:
To use an FQDN-based address object as a destination in a static route, the "Routing configuration" option must be enabled in the firewall address settings. Without this, the address cannot be selected for routing.

NEW QUESTION # 32
Refer to the exhibits.

The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)

• A. Administrators can change the configuration.
• B. FortiGate drops new sessions.
• C. Administrators can access FortiGate only through the console port.
• D. FortiGate has entered conserve mode.

Answer: A,B

Explanation:
Since memory usage is at 90%, exceeding the red threshold (88%), FortiGate enters a state where configuration changes are still allowed.
In this state, FortiGate drops new sessions to preserve resources and maintain stability.

NEW QUESTION # 33
......

FCP_FGT_AD-7.6 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://vcetorrent.examtorrent.com/FCP_FGT_AD-7.6-prep4sure-dumps.html