All Obstacles During CTS-D Exam Preparation with CTS-D Real Test Questions
Fully Updated Free Actual AVIXA CTS-D Exam Questions
AVIXA CTS-D - Design Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting a Needs Assessment | 16.8% |
| Task 1: Identify Decision-makers and Stakeholders | 1.6% |
| Task 2: Identify Skill Level of End Users | 2.4% |
| Task 3: Educate AV Clients | 1.6% |
| Task 4: Review Client Technology Master Plan | 3.2% |
| Task 5: Identify Client Expectations | 4% |
| Task 6: Identify Scope of Work | 4% |
| Duty B:Coordinating with Other Professionals to Develop Project Documentation | 23.2% |
| Task 1: Review A/E (architectural and engineering) drawings | 4% |
| Task 2: Coordinate with architectural/interior design professionals | 4% |
| Task 3: Coordinate with Mechanical Professionals | 1.6% |
| Task 4: Coordinate with Structural Professionals | 1.6% |
| Task 5: Coordinate with Electrical Professionals | 3.2% |
| Task 6: Coordinate with lighting professionals | 2.4% |
| Task 7: Coordinate with IT and network security professionals | 4.0% |
| Task 8: Coordinate with acoustical professionals | 1.6% |
| Task 9: Coordinate with life safety and security professionals | 0.8% |
| Duty C: Developing AV Designs | 48% |
| Task 1: Create Draft AV Design | 10.4% |
| Task 2: Confirm site conditions | 8% |
| Task 3: Produce AV infrastructure drawings | 12% |
AVIXA CTS-D Exam Certification Details:
| Exam Name | AVIXA Certified Technology Specialist - Design (CTS-D) |
| MemberExam Price | $475(USD) |
| Sample Questions | AVIXA CTS-D Sample Questions |
| Schedule Exam | Pearson VUE |
| Books / Training | Candidate Handbook |
| Passing Score | 350 / 500 |
| Duration | 180 mins |
NEW QUESTION # 74
What is the STC range for adequate privacy?
Response:
- A. 40-55
- B. 20-40
- C. 55-65
- D. 0-20
Answer: A
NEW QUESTION # 75
What does "signal attenuation" refer to in AV system design?
- A. Signal reflection within cables
- B. Signal distortion due to interference
- C. Decrease in signal strength over distance
- D. Increase in signal strength over distance
Answer: C
NEW QUESTION # 76
In AV design, what is the purpose of "equalization" (EQ)?
- A. To adjust the frequency response of an audio signal
- B. To increase signal power
- C. To route video signals
- D. To control lighting
Answer: A
NEW QUESTION # 77
Twisted-pair cables offer protection from electromagnetic interference by __________.
Response:
- A. Exposing each wire to the same outside interference, allowing it to be canceled at the input circuit
- B. Shielding each pair inside a foil or braided shield
- C. Physically separating conductors from higher-voltage signals
- D. Comparing the signal that arrives at the destination device against a checksum
Answer: A
NEW QUESTION # 78
An AV conduit riser diagram will show information such as:
Response:
- A. Electrical light wiring
- B. Plumbing routes
- C. Junction and pull boxes
- D. Electrical breaker boxes
Answer: C
NEW QUESTION # 79
What is "plenum-rated" cable used for in AV installations?
- A. In spaces used for air circulation with fire-resistant properties
- B. Temporary setups
- C. Outdoor wiring
- D. High-voltage applications
Answer: A
NEW QUESTION # 80
Which of the following best describes "project commissioning" in AV projects?
- A. Testing and verification of system performance before handover
- B. System design
- C. Installation of AV equipment
- D. Training end users
Answer: A
NEW QUESTION # 81
What factors MUST be considered when designing and drawing rack elevation diagrams?
Response:
- A. Equipment manufacturer, model year of equipment, number of USB ports
- B. User mobility, competence of the technician, quality of the rack material
- C. Amount of RJ-45 connectors used, amount of conduit used
- D. Ergonomics, weight distribution, RF and IR reception, heat loads, signal separation
Answer: D
NEW QUESTION # 82
Who must monitor other areas of the project to ensure that considerations for AV equipment or specifications are met, such as monitoring where an HVAC and sprinkler system are installed?
Response:
- A. HVAC installer
- B. AV project manager
- C. Facilities manager
- D. Building owner
Answer: B
NEW QUESTION # 83
The total length of a measurement from a metric (SI) scaled drawing of 1:50 is 100 mm. What is the actual length?
Response:
- A. 150 meters
- B. 5 meters
- C. 0.5 meters
- D. 50 meters
Answer: B
NEW QUESTION # 84
When designing an AV system, which cable type is best suited for long-distance video transmission with minimal signal loss?
- A. Cat5e Ethernet
- B. Fiber optic
- C. HDMI
- D. RCA
Answer: B
NEW QUESTION # 85
Which type of connector is commonly used for digital audio over coaxial cable?
- A. XLR
- B. HDMI
- C. RCA
- D. USB
Answer: C
NEW QUESTION # 86
Which of the following amplifiers would you specify for a 30 ft x 40 ft conference room with a 10 ft ceiling. The requirements are to provide a system with two front speakers, and two zones of ceiling speakers?
Response:
- A. 4 Channel 300 W/Ch @ 8 Ohm
- B. 4 Channel 100W/Ch @ 4 Ohm
- C. 4 Channel 300 W/ch @ 70V or 4 Ohm
- D. 2 Channel 300 W/Ch @ 70V or 8 Ohm
Answer: C
NEW QUESTION # 87
Which device converts video signals from one format to another?
- A. Switcher
- B. DSP
- C. Video scaler or converter
- D. Amplifier
Answer: C
NEW QUESTION # 88
What type of drawing is pictured below?
Response:
- A. AV device location drawings
- B. Electrical coordination riser
- C. Conduit riser diagram
- D. TELCO/DATA coordination diagram
Answer: C
NEW QUESTION # 89
The total length of a measurement from a U.S. customary scaled drawing of 1/8 inch is 3.5 inches. What is the length of the real object?
Response:
- A. 28 feet
- B. 35 feet
- C. 18 feet
- D. 25 feet
Answer: A
NEW QUESTION # 90
......
Validate your CTS-D Exam Preparation with CTS-D Practice Test: https://vcetorrent.examtorrent.com/CTS-D-prep4sure-dumps.html
